EN
Starting the skimmer
-
open the water level adjuster (WAL) fully by turning it anti-clockwise (Diagram f)
-
switch on water supply through skimmer
-
adjust the water level inside the skimmer with the feed line shut-off cock and the WAL to somewhere between the top and
bottom of the skimmer neck, see (Diagram g)
-
check the skimmer for possible damage and check the whole skimmer installation for leaks.
-
switch on the skimmer pump
-
to prevent initial over foaming and flooding of the skimmer cup, adjust the fine foam level in the cup’s riser tube to the bottom
plate of the skimmer cup. This is achieved by turning the WAL
-
wait a minimum of 24 hours for the final adjustment. Turn the WAL so that the fine bubbles start bursting app. half way up the
cup’s riser tube.
-
for dry foam turn the (WLA) anti clockwise, for wet foam clockwise.
-
Important:
Never allow the pump to run dry.
f) Water level adjuster (WAL) g) Skimmer cup
-13-
Summary of Contents for TC 1655
Page 1: ...TC 1655 Bedienungsanleitung Seite 2 Operating instruction Page 9...
Page 4: ...DE...
Page 11: ...EN...
