HD2402
- 19 -
V1.4
In case of doubt, it is advisable to select the
AUTO
setting, leaving to the instrument
the most appropriate choice to use.
Once a new scale is set, the
Apply
key must be pressed to activate the change. When
pressing the
Apply
key, the setting of inputs is saved in the instrument and will re-
main active even if the instrument is subsequently disconnected.
If a channel measurement is beyond full scale, the corresponding indicator in the col-
umn
Ovf
will appear in red color.
6.2
L
OGGING MODE
It is possible to select if to directly log measurements in a PC or in the external mem-
ory of the instrument.
PC data logging can only be started manually by selecting the
Start PC Log
icon.
In this case, the instrument will necessarily have to remain connected to the PC dur-
ing data logging. After logging startup, the
Start PC Log
icon
is replaced by the
Stop
PC Log
icon. To stop logging, select the
Stop PC Log
icon. Data are saved in the Moni-
tor folder in the predefined folder; the file will be identified by the logging start/stop
time.
Data logging in the instrument memory can be started in a programmed way or ma-
nually. To set the programmed log, select the
Instrument setup
icon and then the
Logging setting
item. The following window will appear:
Select the
Auto-Start enable
box, set logging start date/time in the
Auto-Start Log-
ging
line (start time must be subsequent to the current time indicated in the
PC Clock
line by at least 20 minutes), set log duration in the
Duration of Logging
field
Summary of Contents for HD2402
Page 2: ...HD2402 2 V1 4 HD2402 Photo Radiometer A O R Dosimeter...
Page 55: ......
