23
GB
* * The max. branch thickness that can be chaffed is
dependent on the type of wood and the quality
of the goods being cut.
For hard wood (e.g. oak/beech branches), the
max. branch thickness that can be chaffed is less
than for soft wood (e.g. pine/spruce wood). For
dry or knotted wood, the cutting thickness may
also be less.
Do not exceed the maximum permitted
network impedance of 0.28 Ohms at the
electrical connection point. The user must
ensure that the device is operated only
on a power supply network that fulfils this
requirement. If necessary, the local power
supply company can be asked for the
system impedance.
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be
carried out in the course of further devel-
opment without notice. All dimensions,
references and information of this instruc-
tion manual are therefore without guaran-
tee. Legal claims, which are made on the
basis of the instruction manual, cannot
thus be considered as valid.
Safety precautions
This shredder may cause
serious injuries if improp-
erly used. Before using the
shredder, read the user
manual carefully and famil-
iarise yourself with all of the
controls. In cases of un-
certainty, ask an expert for
advice. Keep the manual in
a safe place and pass it on
to any subsequent owner to
ensure that the information
contained therein is avail-
able at all times.
Symbols on the shredder
Warning!
Read the manual.
Wear ear and eye protec-
tion.
Wear hand protection.
Do not expose the unit to
rain.
Caution! Switch off the
motor and disconnect
from the mains before
adjustment or clean-
ing work, or if the flex is
caught or has been dam-
aged.
Warning! Danger of injury
from rotating blade cylin-
der.
Keep your hands and
feet away from the funnel
feeder while the shredder
is in operation.
Caution!
Trailing blade
Warning! Danger from
spin-off. Keep your dis-
tance from the feeder and
ejection area, and keep
others away from the
danger area.
Do not use as a stepping
92
Guaranteed noise power
level
Summary of Contents for DG-ESS 2844
