Deltafox DG-ESS 2844, Translation Of The Original Instructions For Use

Page: 25 / 128

25
GB
be fastened properly and in
good working order. Replace any
damaged or illegible stickers.
• Only use replacement parts
and accessories supplied and
recommended by the manu-
facturer. Using third-party
parts will immediately invali-
date the guarantee.
• Do not leave the shredder
working unattended and keep
it in a dry place out of chil-
dren’s reach.
• Only connect the shredder to a
properly earthed mains power
supply. Make sure that the ex-
tension cable and socket are
properly earthed.
• If operating a power tool in a
damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use
of an RCD reduces the risk of
electric shock.
Working with the device:
• Make sure that the funnel
feeder is empty before you
start the shredder.
• Keep your head, hair and body
away from the intake opening.
• Do not reach into the funnel
feeder during operation. The
shredder will continue to run
for a short period after you
switch it off.
• Always make sure you are
standing in a firm, balanced po-
sition. Do not lean forwards, and
never stand above the shred-
der when inserting materials.
• Make sure that the material in-
serted into the shredder does
not contain hard objects made
of metal, stone, glass or similar.
• Do not use the shredder in the
rain and in bad weather. Work
in daylight or under good light-
ing conditions.
• Do not operate the shredder
when you are tired or distract-
ed, or under the influence of
alcohol or medication. Always
take a break when you need
one and be sensible about
how you work.
• Switch the shredder off and
pull the plug under the follow-
ing circumstances:
- when you are not using the
device,
- transporting it or leaving it
unattended;
- before releasing a jammed
blade.
- when you are checking the
device, cleaning it or remov-
ing blockages;
- when you are carrying out
cleaning or maintenance work
or replacing accessories;
- Before moving or lifting the
shredder
- If foreign objects should
enter the shredder, if the
shredder is making unfa-
miliar noises or vibrations
(check the shredder for
damage before starting it up
again)
• Do not allow shredded mate-
rial to accumulate near the
ejection area. This may oth-
erwise hinder proper ejection
and force the material back up
through the feeder.
• Do not transport or tip the
shredder with the motor running.
• Keep hands, other body parts
and clothing out of the filling