Chapter 2 Installation and Wiring
|
VFD-B-P Series
Revision April 2009, SW V1.00
2-3
60HP/45kW and figure for capacity installed in parallel
Refer to the following figure for heat sink system
NOTE
Please note that the AC motor drive will generate the heat during operation. Due to the surrounding
temperature, the temperature of the AC motor drive for models 3-20HP should be within 85
o
C(185
o
F)
and models 25-60HP should be within 75
o
C(167
o
F). It can use Pr.00-04 (set to 14) to monitor the
temperature.