manualshive.com logo in svg

Delta RPI M50A, Installation And Operation Manual

Share
Download
Delta RPI M50A Installation And Operation Manual Download Page 70

6 Installation

Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09

70

6.7  Connecting solar modules (DC)

DANGER

Electrical shock

Potentially fatal voltage is present at the invert-

er's DC connections. When light falls on the solar 

modules, they immediately start to generate 

electricity. This also happens when light does not 

fall directly on the solar modules.

 

► Never disconnect the inverter from the solar 

modules when it is under load. 

 

► Turn the AC/DC disconnector to the 

OFF

 

position.

 

► Disconnect the connection to the grid so that 

the inverter cannot supply energy to the grid. 

 

► Disconnect the inverter from all AC and DC 

voltage sources. Ensure that none of the con-

nections can be restored accidentally.

 

► Ensure that the DC cables cannot be touched 

accidentally.

1.  Use a red cable for DC+ and a black cable for DC–.

Use a voltmeter to check the polarity.

2.  Turn the AC/DC disconnector to the OFF position.

Summary of Contents for RPI M50A







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands