9 Measurements and statistics
Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09
124
9.
Measurements and statistics
The following information is available:
Type of information
Description
Measurements
Current data for various parameters
Energy log
Information on the energy generated over the entire usage period of the inverter
Event log
A list of major events, e.g. warning messages, faults, parameter changes etc., with date and time.
Inverter
information
Information on general settings, grid settings, active power and reactive power monitoring, firmware
versions etc. (see “8.2 “Inverter info.” menu area (current settings)”, page 76)
9.1 Measurements
Overview
This menu displays the current data for various parameters in
real time.
Setting options
The displayed information cannot be edited.
Menu item path
Main menu > Meter
Displaying measurements
E-Today: 0kWh
Power: 0W
Status: On Grid
10.Sep 2014 15:32
1.
If the default information is displayed, press any button to open the main menu.
Otherwise, press the
EXIT
button repeatedly until the main menu is displayed.
Inverter Info.
Event Log
Energy Log
Meter
2.
Use the
and
buttons to select the
Meter
entry and then press the
ENT
button.
3.
Use the
and
buttons to page through the menu.
Press the
EXIT
button to cancel.
P 0 0 0 W
I 0 0 0 A
V 0 0 0 V
AC L1 L2 L3
AC side
The instantaneous values for phases L1, L2 and L3 are shown.
V
:
AC voltage in V
I
:
AC current in A
P
:
AC active power in W
E-Today: 0 kWh
Frequency: 0 Hz
Power: 0 W
PF: cap 0.95
AC side
cos phi
:
Active power factor cos phi
Power
: Instantaneous active power being fed in kW
Frequency
:
Current grid frequency in Hz
E-Today
:
Amount of energy generated today up to now
P 0 0 W
I 0 0 A
V 0 0 V
DC DC1 DC2
DC side
The instantaneous values for DC inputs DC1 and DC2 are shown.
V
:
DC voltage in V
I
:
DC current in A
P
:
DC active power in W