6
Quick installation guide for RPI M15A M20A inverters
Planning the installation
5
ESC
ENT
ESC
ENT
>50 cm
> 30 cm
> 30 cm
> 30 cm
>20 cm
► Ensure adequate air circulation. Hot air must be able
to dissipate upward Keep enough space around each
inverter
► Do not install inverters directly above one another.
Otherwise, the upper inverter is warmed up by the
lower one
► Consider the
operating temperature range
(see sec-
tion “Technical data”).
When the operating temperature range is exceeded,
the solar inverter reduces the amount of power gener-
ated
Ambient temperature and air circulation
Outdoor installations
► The solar inverter has protection
degree IP65 and can be installed
indoors or in protected outdoor
areas (that means outdoor but
protected by a roof against direct
sun, rain or snow).
ESC
ENT
► Mount the solar inverter vertically
Where to mount the inverter
??
??
✔
✘
✘
► Mount the solar inverter so that the
LEDs and display can be easily seen
and that the buttons can be operated.
Make sure the reading angle and instal-
lation height are sufficient.
► Always use the mounting plate
supplied with the solar inverter
► Check that the wall is capable
of bearing the heavy load of the
device
► Use dowels and screws that are
suitable for the wall material and
the heavy weight
► Mount the solar inverter on a
vibration-free wall to avoid disrup-
tive vibrations.
► Possible noise emissions can
be disruptive when the device is
used in living areas or in buildings
with animals Therefore, choose
your installation location carefully
Mounting orientation
► The solar inverter is very heavy
The solar inverter must be
lifted and carried by at least two
people
43 kg
