Each MonkeyMESH Bracket has a “mounting flange”. This is the section of the MonkeyMESH
Bracket that will be fixed to the upright. The mounting flange must always be facing “outwards” from
where the MonkeyMESH Panel will be.
MonkeyMESH Brackets can be used “either way up”, but must always have the mounting flange
facing outwards from the MonkeyMESH Panel and must be the “same way up” for both “top
brackets” and the same way up for both “bottom brackets”.
For the following instructions, we have chosen Option 3 for the purposes of our illustrations.
Top Brackets
Bottom Brackets
Top Brackets
Bottom Brackets
Top Brackets
Bottom Brackets
Option 1: Correct
Option 2: Correct
Option 3: Correct
Option 4: Correct
Incorrect
Incorrect
MonkeyMESH Manual
P7
MonkeyMESH Bracket Arrangement
Preparation
Introduction
Assembly and Installation
Inspection
RACKMAN AUSTRALIA
AUTHORISED DISTRIBUTOR
1300 722 626
www.rackmanaustralia.com.au
