16
Quick Installation Guide for Solar Power Inverter M125HV EU V1 EN 2019-04-01
Mounting the inverter – wall mounting
Special case: Mounting the inverter without
screwing the feet
In general, the inverter must
always
be screwed
down by the feet. Deviations from this are only
allowed in exceptional cases approved by Delta
Electronics. Always check with Delta Customer
Service
first
if you want to deviate from the work
instructions given in this section.
1. Screw the mounting bracket for wall mounting to the feet
of the inverter with 2 M10 screws (torque: 15 Nm), a
spring washer and a washer each. The screws are sup-
plied in the scope of delivery.
2. Attach the mounting plate to the wall/the mounting system
with 6 M10 screws.
