5 Planning the installation
Use of type-1 AC surge protection devices
Installation and Operation Manual M125HV EU V3 EN 2021-07-12
48
5.8
Use of type-1 AC surge protection de-
vices
Related topics
“9.3 Install type-1 AC surge protection device”, page 90
The inverter is pre-equipped for the use of type-1 AC surge pro-
tection devices.
The accessories required for connection are included in the
scope of delivery. The type-1 AC surge protection devices them-
selves are
not
included in the scope of delivery.
The type-1 AC surge protection devices are designed for mount-
ing on a DIN rail (always included in delivery).
max. 96 mm
max. 108 mm
max. 55 mm
max. 58 mm
max. 96 mm
max. 108 mm
max. 55 mm
max. 58 mm
Fig. 5.19: Dimension restrictions for type-1 AC surge protection devices
Observe the restrictions regarding the dimensions
of the type-1 AC surge protection devices! The
Fig. 5.19, p. 48 must
not be exceeded!
For example, a Phoenix Contact type-1/2 surge
protection device (order no.: 2905988) would be
suitable.
