6 Installation
Mounting the inverter
Installation and Operation Manual M125HV EU V3 EN 2021-07-12
54
6.4.2 Wall mounting
Special case: Mounting the inverter without
screwing in the feet
In general, the inverter must
always
be screwed
onto the feet during wall mounting. Deviations
from this are only possible in exceptional cases
approved by Delta Electronics. Always check
with Delta Customer Service
first
if you want to
deviate from the work instructions given in this
section.
1. Screw the mounting bracket for wall mounting to the feet
of the inverter with 2 M10 screws (torque: 15 Nm), a
spring washer and a washer each. The screws are sup-
plied in the scope of delivery.
2. Attach the mounting plate to the wall/the mounting system
with 6 M10 screws.
