Delta LD-100E-M22, Operating Manual

Page: 11 / 33

Chapter 2 Settings and Measurements
LD-E Operation Manual
2-6
◎
Set the zero value
The operation on the main screen is as follows
<Set the zero value>
Press the up button and down button at the same time for 3 seconds.
<Remove the zero value>
Press the up button and down button at the same time for 6 seconds.
◎
Advanced Mode
Press the down button for 3 seconds to get in the menu of advanced settings. After entering, press
the down button for 3 seconds to return to the measurement screen.
Initial state Content
Response
speed setting Response time setting:
“
”: high speed 1.5ms, ” ”: standard
3ms, ” ”: High precision 5ms
Moving average
setting Average speed setting:
“
”: average 1 time , “ ”: average 2 times, “ ”:
average 4 times, “ ”: average 8 times , “ ”:
average 16 times
、
“ ” : average 32
次 、
“ ” :
average 64
次 、
“ ” : average 128
次 、
“ ” :
average 256
次 、
“ ” : average 512
次 。