eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4
Page 69 of 126
Object
Mapping
R/W
AV529
Backlight Color
0 = use RGB value from R = AV526, G = AV525, B =
AV524.
1 = WHITE (255, 255, 255)
2 = RED (255, 0, 0)
3 = GREEN (0, 255, 0)
4 = BLUE (0, 0, 255)
5 = YELLOW (255, 255, 0)
6 = MAGENTA (255, 0, 255)
7 = CYAN (0, 255, 255) 8 = LIGHT BLUE (0, 128, 255)
9 = GREEN BLUE (0, 255, 128)
10 = LIGHT GREEN (128, 255, 0)
11 = ORANGE (255, 128, 0)
12 = FUCHSIA (255, 0 128)
13 = VIOLET (128, 0, 255)
>= 14 is WHITE
R/W
AV530
Auto-Backlight
0 = disable: Uses LCD0.Backlight to set backlight
according to either AV528 On Brightness or AV527 Off
Brightness.
x > 0 = After a button/slider press, backlight is set to
AV528 On Brightness for x seconds, and then reverts back
to AV527 Off Brightness. The LCD0.Backlight property is
ignored.
See the Backlight Operation section.
R/W
AV531
PIN for configuration menu and NFC Apps. Using 0’s and
1’s, there are 16 combinations: from 0000 to 1111. If any
digits are not a 0 or 1, access to the configuration menu
will not be possible.
R/W
