D V P - E S 3 S e r i e s O p e r a t i o n Ma n u a l
8 - 2
_8
8.1
Hardware Configuration Tool for DVP-ES3 Series Modules -
HWCONFIG
HWCONFIG is a built-in hardware configuration tool in ISPSoft. You can set up CPU and module parameters,
download/upload parameters, detect a hardware configuration online, and make a diagnosis through HWCONFIG.
You must download all parameters set in HWCONFIG to the CPU module for them to take effect.
8.1.1 Introduction of the HWCONFIG Environment
In ISPSoft, double-click
HWCONFIG
in the project management area to start
HWCONFIG
.
Delta Electronics provides you with specific configuration tools for some CPU modules. You can add extension
modules to the right side of the DVP-ES3 Series CPU module. The system configuration area displays the present
system configuration. When you modify the configuration in the system configuration area, the information in the
information list updates.
Parameter:
settings for CPU
AIO Wizard:
settings for the right-side extension modules
CANopen Builder:
for CANopen communication
EIP Builder:
for EIP communication
You can use tools such as CANopen Builder and EIP Builder to set advanced network assignments for the modules.
Refer to the manuals for the communication software tools for more information on setting up communications.
Summary of Contents for DVP-ES3 Series
Page 26: ...DVP ES3 Series Operation Manual 1 14 _1 MEMO ...
Page 232: ...DVP ES3 Series Operation Manual 8 28 _8 MEMO ...
Page 385: ...DVP ES3 Series Operation Manual 13 8 _13 MEMO ...
Page 399: ...DVP ES3 Series Operation Manual B 4 _ B MEMO ...