Delta DPM-C520, Operation Manual

Page: 31 / 82

D
P M - C
5 2 0 / C 5 2 0 W O p e r a t i o n M a n u a l
4 - 4
_4
1. Press BACK key to enter the setting page.
2. Press UP and DOWN keys at the same time for 5 seconds to unlock the setting.
3. Press NEXT key to see the setting option TIM & DAT.
4. Press DOWN key to enter the date (DAT) setting page.
5. When the option (YY) starts blinking, you can use UP and DOWN keys to select the number of the
year.
6. Press NEXT key to confirm the setting.
7. When the option (MM) starts blinking, you can use UP and DOWN keys to select the number of the
month.
8. Press NEXT key to confirm the setting.
9. When the option (DD) starts blinking, you can use UP and DOWN keys to select the number of the
date.
10. Press NEXT key to confirm the setting.
Note: You can go back to the previous setting item by pressing BACK key anytime, whether you have
completed or canceled the setting.
4.2.4 Communication Setup (COM)

Address (ID): device ID; its address setting range is 1-254 (default: 1).

Baud Rate (BR): transmission speed; the setting options are 9600 kbps (default), 19200 and 38400 bps.

Parity setting (PA): odd and even checking bit for communication; the setting options are None (8n1),
Even (8E1), and Odd (8o1); default: None (8n1).

Steps:
1. Press BACK key to enter the setting page.
2. Press UP and DOWN keys at the same time for 5 seconds to unlock the setting.
3. Press NEXT key to see the setting option COM & SYS.
4. Press UP key to enter the communication (COM) setting page.
5. Use UP and DOWN keys to select the device ID. (one digit at a time; hundreds digit

tens digit

units digit
)
6. Press NEXT key to confirm the setting and start to set the next device ID.
7. Repeat steps 5-6 till you complete the settings of the 3 digit device ID. Press NEXT key to set up the
baud rate.
8. When the option starts blinking, you can use UP and DOWN keys to select the baud rate you need.
9. Press NEXT key to confirm the setting and start to set the next setting, parity.
10. When the option starts blinking, you can use UP and DOWN keys to select the parity you need.
11. Press NEXT key to confirm the setting.
Note: You can go back to the previous setting item by pressing BACK key anytime, whether you have
completed or canceled the setting.