User and Installation Manual for DE212-1S Wired Deadman
D
ELTA
RCS
AS
Page 10 of 17
Document: 02002
3.3
M
AINTENANCE
This equipment should be kept as clean as possible at all times.
Physical damages that may result in cracks or holes on the cabinets should be repaired as soon as possible by
competent personal. This, because there is a large risk of humidity, dirt and oil entering the unit. If the unit is, for
example, exposed by hydraulic oil, it may cause severe damage on the circuit board. Hydraulic oil and other thin
oils are largely penetrable, especially when the equipment housing is damaged. Dirty equipment should
therefore always be cleaned.
As a rule, the equipment should be sent to service as quick as possible when such damages occurs, without
waiting till the equipment does not work any longer - it might be too late to do any repairs.
4.
S
PARE PARTS
.
The following spare parts are available:
Order number
Type number
Item description
11400
Coiled cable, 14m long fully streched.
01740
CU212-1S
Control Unit with 3 min. timer. (Not ATEX approved)
01741
CB212-1S
Complete Handswitch, with cable strain relief, but no cable.
01735
Control unit printed circuit board, with 3 min. timer.
01722
Printed circuit board, for handswitch
11399
Cable gland with gland nut and bending protection for handswitch
11431
Wall- mount, fixture for handswitch.
