background image

 

User and Installation Manual for DE212-1S Wired Deadman 

 

D

ELTA  

RCS

 

AS 

 

Page 11 of 17 

 

 

Document: 02002 

5.

 

W

ARRANTY 

C

ONDITIONS

 

 

Complaints 
When receiving the product the buyer must inspect it, and eventually complain any obvious faults or missing 
items within 8 days from reception.  Acceptance of complaint will otherwise not be considered.  Complaints of 
any faults that could only first be discovered after mounting and testing the product must be reported 
immediately after recognition. 
 
Warranty 
The warranty covers only damages caused by material faults and manufacturing errors. 
 
The guaranty ceases 12 months after the delivery date. 
 
Delta RC AS AS or appointed repair workshop, is bound to repair and replace defect parts in its products, free of 
charge, in its main workshop during its normal working hours. Packages being sent to and from Delta RC AS are 
in the responsibility of the purchaser, as he is also economically responsible for paying the transportation 
charges, toll, insurance and other related charges. 
 
Should the warranty repair be done at the customer's location, there will be charges for cost of travelling, 
accommodation and dieting

, conforming to the government’s assertions.  There will also be  an additional 

charge of 50% of travelling time by the current repair regulations. 
 
The warranty is cancelled if: 
 
a)  There has been done any modification or attempts in the product without a  

written permission from Delta RC AS A/S. 

 
b)    The product has been handled wrongly or has not been maintained properly. 
 
c)    The payment conditions have not been fulfilled. 
 
 
Repair work 
Repair work done after the warranty period is charged at full cost. Packages being sent to and from Delta RC 
AS

’s workshop are on the purchaser's cost and risk.

 

 
If the repair work is done at the customer's location, by Delta RC AS serviceman, there will be charges for costs 
of travelling, accommodation, dieting, travelling time and hours of work. 
 
Warranty exceeding 3 months after repair work is limited to cover only the fault that was repaired.  A new fault 
after the repair must be pointed by the customer. 
 
Any other defect or missing part during this period is not covered by the warranty.  Should Delta RC AS offer a 
service unit during the warranty time, the purchaser pays for the transportation, insurance and a weekly rent. 

 

 

Summary of Contents for DE212 GLOBAL


















Reviews: