background image

16

DELTA ELECTRONICS THREE YEAR LIMITED WARRANTY
Delta Electronics Inc. (“Delta Electronics”) warrants to the original consumer purchaser in the USA that the Breez 

ventilation fan products will be free from defects in material or workmanship. This warranty is limited to three (3) years 

from the original date of purchase.
Limitations and Exclusions
1.  During the warranty period, a replacement for any defective product will be supplied free of charge for installation 

by the consumer. The warranty provided herein does not cover charges for labor or other costs incurred in the 

troubleshooting, repair, removal, and installation service.

2.  All returns of defective parts or products must include the product model number, and must be made through an 

authorized Delta Electronics distributor. Authorized returns must be shipped prepaid. Repaired or replacement 

products will be shipped by Delta Electronics F.O.B. shipping point.

3.  Delta Electronics shall not be liable for any indirect, incidental, consequential, punitive, or special damages arising 

out of or in connection with products use or performance, regardless of the form of action whether in contract, tort 

(including negligence), strict product liability or otherwise.

4. 

This warranty does not extend to fluorescent lamp starters and tubes.

5.  The warranty does not cover if user does not comply with manufacturer’s installation manual.
6.  To qualify for warranty service, you must notify Delta Electronics at the address or telephone number below.
7.  Delta Electronics shall have no liability to the original owner-user with respect to any defect caused by abuse, 

misuse, neglect, improper transportation or storage, improper testing, improper installation, improper operation, 

improper use, improper maintenance, improper repair, improper alteration, improper modification, tampering or 

accident of products or parts thereof, or unusual deterioration or degradation of products or parts thereof due to a 

physical environment beyond the requirement of products' specifications.

Address: 46101 Fremont Boulevard, Fremont, CA 94538
US Toll Free Number:
1-888-979-9889 – Technical Support
1-877-685-4384 – Customer Sales Support
www.deltabreez.com

WARRANTY

Summary of Contents for breez VFB160D6A3-DGL

















Reviews: