10
ASSEMBLY INSTRUCTIONS
7. Remove the fan junction box cover
a
. Using 2
wire nuts (not supplied), connect house wires to fan
wires
b
a s shown in the wiring diagram on page
5. 14AWG is the smallest conductor that shall be
used for branch-circuit wiring. Reattach fan junction
box cover
c
.
8. Insert housing can into the ceiling cut out. Secure
the housing can from below by using 2 long wood
screws through the flange into the wood support
and 2 long wood screws through the flange into the
joist.
Hardware
A
Long wood screw
9. Attach the duct connector from the housing can
inside, and secure using the duct screw.
10. Insert fan unit and secure by 3 screws.
a
c
b
Pull existing ductwork
into Housing
1
2
3
Insert tab into slot
in Housing
Duct screw(M4X12)
4
8
7
9
10
