background image

Page 4

CONGRATULATIONS ON THE PURCHASE OF YOUR NEW 

E-BIKE!

The Delta rDrive is a new generation of e-bike designed and developed based on 
many years of experience with our e-bike partner Promovec. Please read this user 

manual as it contains important information concerning the safe use and maintenance 

of this e-bike.

The Delta rDrive is a modern e-bike that has been manufactured following the latest 
production standards and techniques ensuring you have the highest quality bike with 

premium performance.

If you have further questions regarding your e-bike operation or assembly, please 
reach out to us at 800-474-6615 or www.designbydelta.com for Delta Customer 

Service.

INTENDED PURPOSE

The e-bike is intended for use on regular paved surfaces as well as upaved surfaces,  

gravel roads and trails with moderate grades.

CAUTION

•  Do NOT use the e-bike in combination with a bike trailer.

•  Always use original Promovec spare parts when replacing electrical components.

•  Do NOT clean the e-bike with a high-pressure cleaner.

• 

If the electrical system is modified the warranty is null and void.

BPSA CLASSIFICATION - CLASS 1

A “Class 1 electric e-bike” or “Low-speed pedal-assisted e-bike,” is an e-bike equipped 

with a motor that provides asssistance only when the rider is pedaling and that ceases 

to provide assistance when the e-bike reaches the speed of 15.5 mph

Summary of Contents for BR1000





































Reviews: