manualshive.com logo in svg

Delta BR1000, User Manual

Share
Download
Delta BR1000 User Manual Download Page 29

Page 29

TRANSPORTATION OF E-BIKES

 Your E-bike must be transported with an approved e-bike rack. Electric bikes are heavier 
compared to traditional bikes, and require a bicycle carrier with a larger load capacity. 

Always remove the battery before transporting your electric bike.

ROAD TRAFFIC LAW  

While riding your e-bike, you must adhere to all traffic laws in your state.

Always wear a helmet!

We also recommend you use a front headlight and rear taillight when riding; day or night. 

It is your responsibility to understand and follow any state regulated laws which pertain 

to the use and ownership of e-bikes and where you can or cannot ride them. This also 

includes personal insurance that some states may require.

INSURANCE

An electric bike for insurance purposes as is usually covered by a standard household 

insurance.

However, we recommend that you talk to your insurance agent about the technical 
aspects of your e-bike due to the high value of the item.

FRAME NUMBER

Your e-bike is provided with a serial number. It is located on the leftside of the seatube. It’s 
recommended you make a note of this number within the pages of this user manual.

Summary of Contents for BR1000





































Reviews:

No comments

Brands by name

Popular brands

Load more brands