Delta BR1000 Page 27 User Manual Download | Manualshive

Page: 27 / 36

background image

Page 27

THE CHAIN

The bike chain must be lubricated with regular intervals with a lubricant dedicated for
bike chains. This is done to increase the lifetime of the chain and to make it run smooth.
A chain that is not lubricated will start to rust and will add extra wear to the drivetrain.
Furthermore, the chain will become more fragile and over time there is a risk it will break.

REFLECTORS

Reflectors are mounted on the spokes in each wheel. Make sure that reflectors are visible
from the side and regularly cleaned to make sure they reflect light. Replace any damaged
reflectors. It is your responsibility that the bike lives up to local law and legislation.

CAUTION

Check reflectors and their mounting

brackets regularly to make sure that
they are clean, straight, unbroken and

securely mounted. Have your dealer
replace damaged reflectors and

straighten or tighten any that are bent

or loose.

«
...
25
26
27
28
29
...
»

Summary of Contents for BR1000





































Reviews:

No comments

Related manuals for BR1000

FOLDING KIDDIE KICK

Brand: Razor Pages: 18

1985-1988 Elite CH250

Brand: Honda Pages: 224

Brand: APRILIA Pages: 315

Brand: Kettler Toys Pages: 16

Brand: Shoprider Pages: 20

Brand: Vermeiren Pages: 216

Brand: Tab Pages: 24

Brand: Solax Pages: 18

Brand: Aero Pages: 2

Brand: Lacros Pages: 16

Brand: PEUGEOT Pages: 21

Brand: PEUGEOT Pages: 52

Brand: Handicare Pages: 89

Brand: Xiaomi Pages: 11

Brand: Hudora Pages: 8

Brand: Merits Pages: 30

Brand: Merits Pages: 30

Brand: Merits Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands