8.0 Connecting a finger float to the AlertMaxx unit
8
For technical support, please call 01279 757400
AlertMaxx
Figure 4. Wiring a finger float switch
1. Using a draw cord, pull the float cable through the cable duct on the chamber.
2. Insert a large cable gland into the second from right hole of the AlertMaxx unit.
3. Pull the float cable through the small cable gland on the AlertMaxx unit.
4. Connect the blue and a brown cable from the float switch cable to the terminal strip (see figure 4).
PLEASE NOTE
If the cable supplied with the float switch is too short, the cable can be extended using a cable with a
minimum core cross sectional area of 1mm².
E
N
L
40
120
20
70
50
80
BLUE
BLACK
BROWN
BLUE
BROWN
BLACK
E
N
L
40
120
20
70
50
80
