AlertMaxx
For technical support, please call 01279 757400
5
3.0 Technical information
AlertMaxx Specification
Size (without cable glands)
W: 115mm x D: 95mm x H: 60mm
Weight
650g
Mains Supply
200-250V AC (50Hz)
Internal Battery
Pb 6V - 1.2Ah
Alarm Sound Level
81db
Visual Display
Red, Blue, Green LED
Operating temperature
5-35°C
Approximate Installation time
30 minutes
4.0 Unit location
The AlertMaxx must be positioned in an area where the alarm can be clearly heard and is permanently
accessible.
5.0 Mounting the AlertMaxx unit
CAUTION!
The AlertMaxx unit is not waterproof and must be installed indoors or inside a kiosk.
1. Using the template provided on page 15 of this instruction manual (figure 1), mark the fixing
positions on the wall.
2. Drill the two holes and fit suitable wall plugs (ensure correct wall plugs are used for the wall type).
3. Remove the screws from the front of the unit that secure the front fascia.
4. Secure the AlertMaxx unit to the wall using appropriate screws.
PLEASE NOTE
When securing the unit to the wall, avoid over tightening the screws as this may cause the box to crack.
