Delta Tau 300-602804-10x Hardware Reference Manual Download Page 32

Page: 32 / 34

MACRO CPU Board Hardware Reference Manual

Accessories

ACCESSORIES

Both the Turbo and the MACRO CPU boards can support either the Stack or the UMAC configuration.
The systems are configured modularly with the selection of a series of accessory boards, some appropriate
for the Stack, and some appropriate for the UMAC. These accessories are listed here. Each has its own
manual for detailed description.

The following table shows 3U products by function:

MACRO CPU Board
Options

Board must be ordered with
either Option A or Option C.

Option A, fiber-optic
connectors

Option C, RJ-45 electrical
MACRO connectors

Acc-1E, 2-Axis Interface
Stack Board (UMAC
MACRO only), 3x0-602810-
10

Acc-2E, 4-Axis Interface
Stack Board, 3x0-602805-
10x

Acc-3E, 48/96/144 TTL I/O
Stack Board, 3x0-602811-
10x

Stack Piggyback
Accessory Boards

Acc-4E, Isolated 24-In/24-
Out Stack Board, 3x0-
602872-10x

Acc-6E, 8/16-Channel 12-Bit
ADC Stack Board,
3x0-602810-10x

Acc-24E2, 2-Axis Digital
PWM, 3x0-603397-10x

Option 1D, Additional 2-
Axis Digital PWM, 3D1-
603397-10x

Acc-24E2A, 2-Axis Analog,
3x0-603398-10x

UMAC Backplane-
Mountable Accessory
Boards –Axis

Option 1A, Additional 2-Axis
Analog, 3A1-603398-10x

Acc-24E2S, 4-Axis Stepper,
3x0-603441-10x

Acc-3E1, 48/96/144 I/O,
3x0-603359-10x

Acc-9E, 48 In, 3x0-603283-
10x

Acc-10E, Isolated 48-Output
Board, 3x0-603299-10x

UMAC Backplane-
Mountable Accessory
Boards –I/O

Acc-11E, Isolated 24-In/24-
Out Board, 3x0-603307-10x

Acc-12E, Isolated 24-In/24-
Hi-Power-Out Board,
3x0-603277-10x

Acc-14E, 48 I/O,
3x0-603472-10x

UMAC Backplane-
Mountable Accessory
Boards –
Communication

Acc-55E, (UNET)
Universal Field Bus Adapter
Network Card, 3x0-603485-
10x

Acc-28E, 16-Bit A/D,
3x0-603404-10x

Acc-36E, A/D, D/A
Converter, 3x0-603483-10x

Acc-51E, X 4096
Interpolator,
3x0-603438-10x

Acc-53E, SSI, 3x0-603360-
10x

Acc-56E, Extender Card,
300-603401-10x

Acc-57E, Yaskawa or
Mitsubishi ABS, Encoder
Unit, 3x0-603484-10x

UMAC Backplane-
Mountable Accessory
Boards – Miscellaneous

Acc-58E, R/D Converter,
16 Bit, 3x0-603482-10x

Acc-U4, UBUS 4-Slot
Backplane, 300-603462

Acc-U6, UBUS 6-Slot
Backplane,
300-603403-10x

Acc-U8, UBUS 8-Slot
Backplane,
300-603463-10x

UBUS Backplane
Boards

Acc-U10, UBUS 10-Slot
Backplane, 300-603464-10x

Acc-U12, UBUS 12-Slot
Backplane, 300-603465-10x

Acc-U14, UBUS 14-Slot
Backplane, 300-603466-10x

Acc-U16, UBUS 16-Slot
Backplane, 300-603471-10x

Acc-U18, UBUS 18-Slot
Backplane, 300-603491-10x

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for 300-602804-10x



































Search results

Summary of Contents for 300-602804-10x

Reviews:

Related manuals for 300-602804-10x

Brands by name

Popular brands

Delta Tau 300-602804-10x, Hardware Reference Manual

Search results

Summary of Contents for 300-602804-10x

Reviews:

Related manuals for 300-602804-10x

Brands by name

Popular brands