background image

Unpacking 

Check your contents against your order and any packing lists. You should have: 

  DL2e fitted with any of the following options: 

 

input cards LAC1, ACD1, LFW1, DLC1 and/or ACS1 

 

case  height extensions if ordered 

  Ls2Win PC software on CD and Tutorial Kit 
  Serial cable type LRS1 for DL2e to PC communication. 
  Spares and Accessory pack 

The following optional accessories are supplied packed separately (if ordered) 

  Attenuator card type LPR1 
  Input Protection Card type LPR1V 
  Rechargeable battery pack type LBK1 
 Battery 

charger 

Many compatible sensors are available – too many to list here! 

Overview 

The DL2e can log up to 128,000 readings on up to 64 channels. It has a wide choice of 
input cards for recording DC & AC voltage, resistance, counts, frequency and status. 
The software is easy to use and supports most sensors. GSM modems and automatic 
data collection is possible from remote sites. It is battery powered, weatherproof, 
rugged and portable.  Weather station packages and evapo-transpiration software are 
available. 

battery holder 
under lid 

external power socket 

safety earth terminal 

sealed RS232 connector 

front panel 

terminal 
compartment 
cover 

 

© 2006 Delta-T Devices Ltd

 

v1.1  Page 2 

Summary of Contents for DL2e













Reviews: