- -
5
1.
GENERAL
CHARACTERISTICS
The Manometer - Thermometer Model HD2304.0 is a portable instrument that allows measurement
of
absolute, relative
and
differential pressure
, and
temperature
.
The
PP471
electronic module is used to measure the pressure. The module works as an interface
between the instrument and the TP704 and TP705 series Delta Ohm probes.
The
temperature
is detected using immersion, penetration, contact or air Pt100 probes with
SICRAM module, or direct 4 wire Pt100 probes.
The probes are fitted with the SICRAM
automatic detection
module, with the factory calibration
settings already being memorized inside.
The units of measurement for the measurable quantities are:
Pa (Pascal)
hPa (hectopascal)
kPa (kilopascal)
mbar (millibar)
bar (bar)
atm (atmosphere)
mmHg (millimeter of mercury)
mmH
2
O (millimeter of water)
kgf/cm² (kilogram-force/square centimeter)
PSI
inchHg (inch of mercury)
°C/°F
Using the MAX, MIN and AVG function of this instrument respectively obtains the maximum,
minimum or average values.
Other available functions are:
the relative measurement REL;
the HOLD function;
the automatic turning off which can also be disabled.
For further details see chapter 2.
