HD2108/HD2128
- 18 -
V2.3
The following table reports the indications provided by the instrument as they appear on the display,
together with their description.
Display indications
Explanation
>>>_CAL_MODE >>> KEY_UNIT
FOR_NEW_USER CAL_
calibration mode >>> press UNIT to start a new user calibration
>>>_LOG_DUMP_or_ERAS
transfer or erase data
1ST_MEAS UP DOWN
correct the first point using the arrows
/
2ND_MEAS UP DOWN
correct the second point using the arrows
/
BATT TOO LOW - CHNG NOW
battery discharged - replace it immediately
BAUDRATE >>>
baud rate value
CAL FACT
factory calibration
CAL USER
user calibration
COMM STOP
printing complete
COMM STRT
printing started
DAY_
day
DUMP_END
data transfer complete
DUMP_In_PROG >>>
data transfer in progress
ERR
error
FUNC CLR
max, min and average values clearing
FUNC CLRD
max, min and average values clearing
HOUR
hour
LOG In PROG
logging in progress
LOG MEM FULL
memory full
LOG_CLRD
memory data cleared
LOG_STOP
logging complete
LOG_STRT
logging started
MIN >>> USE_UNIT_TO_ZERO SEC
minutes >>> use the UNIT key to reset the seconds
MNTH
month
OVER
maximum limit exceeded
PLS_EXIT >>> FUNC RES_FOR_FACT
ONLY
please exit using ESC >>> function reserved to factory calibration
PRNT AND LOG INTV
printing and logging intervals
PRNT INTV >>>
printing interval
SEL CHAN
input channel selection
SEL MEAS 1/2
select the first/second calibration point
SLP_MODE_LOG
turning off during recording mode
SYS ERR #
program error number #
UNDR
minimum limit exceeded
YEAR
year
