HD2108/HD2128
- 12 -
V2.3
8)
MIN (minutes)
: to set the current minutes. In order to correctly synchronize the minute, it is
possible to reset the seconds by pressing the UNIT key. Use the arrows to set the minutes,
press the UNIT key to confirm: this synchronizes the time to the second. Press ENTER to go
onto the next item.
9)
BAUD_RATE:
indicates the frequency used for the serial communication with the PC.
Values from 1200 to 38400 baud. Use the arrows to modify this parameter and confirm
using ENTER.
The communication between instrument and PC (or serial port printer)
only works if the instrument and PC baud rates are the same
. If the USB connection is
used this parameter value is automatically set (please see the details on page 23).
LOG/DumpLOG key - only HD2108.2 and HD2128.2
In measurement mode, this function starts and stops the logging of a data block to be saved in the
instrument's internal memory. The data logging frequency is set in the "
Print and log interval"
menu parameter. The data logged between a start and subsequent stop represent a block.
When the logging function is on, the LOG indication is displayed, the battery symbol blinks and a
beep is issued each time a logging occurs;
the battery symbol does not appear when using an
external power supply
.
To end the logging, press LOG.
The HD2108.2 and HD2128.2 can turn off during logging between one capture and the next: the
function is controlled by the
Sleep_Mode_LOG
parameter. When the logging interval is less than
one minute, the logging instrument remains on; with an interval of at least one minute, it turns off
between one capture and the next if the parameter
Sleep_Mode_LOG
=YES.
>>>
Dump LOG - only HD2108.2
When the LOG key is pressed after the MENU key, the transfer of the logged data on the serial port
is started.
Please see the paragraph dedicated to data transfer on page 23.
[
+
]
>>>
Dump LOG - only HD2128.2
To start the transfer of the data contained in the instrument internal memory via the serial port, press
simultaneously the FUNC/Enter and A-B/Menu keys, and then the LOG/DumpLOG key.
Please see the paragraph dedicated to data transfer on page 23.
