EN
11
10
❷
On the remote control press
and
at the
same time and hold for 3 seconds, until the red
LED fl ashes. Release.
If a receiver is found, the LED will light up
green briefl y.
❸
After a few seconds, the shutter will activate
twice to confi rm the association.
The LED stops fl ashing.
The association mode is automatically exited.
1
2
3
4
1
2
3
4
... ... ...
> 3s
1
2
3
4
TYXIA
TYXIA
> 3s
3/ Wireless association
This chapter allows you to associate a remote
control with an X3D wireless motor or X3D roller
shutter receiver.
You can associate up to 16 receivers (or motors).
3.1 Associating a receiver or motor
3.1.1 A single receiver is turned on
❶
Press and hold the receiver button for 3 seconds
until the LED fl ashes, release.
