EN
5
4
1/ Remote control installation
2/ Installing the receiver
Recommendations
IMPORTANT: the control wires are not insulated
from the mains power supply. All connected equip-
ment must be marked CE and meet the require-
ments of the low voltage devices as well as assembly
recommendations. Local control wires can be
extended up to 10 m (separate from the 230 V).
The roller shutter high and low stops must be set
before the receiver is installed.
1.1 Mounted on the wall
1.2 Placed on a flat surface
Use an electrically
isolated tool to
perform the actions
on the receiver con-
figuration button.
10A circuit breaker
required.
10 A
