EN
7
6
You can install the receiver for roller shutter in
a fl ush-mounted box behind a switch or control
push-button or in a sealed box inside the roller
shutter, a safe distance from metal parts.
Switch off the installation
power supply
230V~
OFF
2/ Installing the receiver
2.1 Connection instructions
for terminals 1 2 3 4.
Strip the wires while respecting
the strip length specifi ed on the product.
Removal recommendations
- Switch off the power supply.
- Use the tool supplied or a
2.5 mm screwdriver to press
the button of the front terminal
before removing the wire.
1
2 3
4
1
2
IPx4
2
1
•
Stranded wires
Using the tool supplied or a
2.5 mm screwdriver, press the
terminal button then insert the
wire.
•
Solid wires
Push the wire fully
into the terminal.
0,75 - 1,5 mm
Ø
2
