- 17 -
EN
4.3 Deactivating the system
• Complete shutdown
Ê
Press
,
The red LED switches on,
Ë
Place your badge on the detection zone before 5 seconds.
The LED changes from red to green to confirm the action.
• Shutdown by zone (1 or 2)
Example: zone 1 (floor)
Ê
Press the
button, then
,
The red LED switches on,
Ë
Place your badge on the detection zone before 5 seconds.
The LED changes from red to green to confirm the action.
4.4 Manual override
Ê
The alarm control unit denies the activation.
It emits a series of beeps to warn the user.
On the badge reader, the LED flashes red.
Ë
Confirm a second time by pressing
ON + badge within
5 seconds after first pressing the button.
The LED changes from red to green to confirm the action.
OK
< 5s
< 5s
OK
1
2
1
2
ON
1
< 5s
ON
ON
1
2
4. Use with the badge reader
Depending on the installation settings, the alarm control unit
will or will not emit beeps to confirm the activation or deacti-
vation actions.
The
and/or
buttons must be configured in Mode A
(see table, § 4.1).
For example, this function is used to activate the system even
if an entry remains open or if a product shows a defect (dead
battery, etc.).
Beep, beep, beep
Activation denied (e.g.
open entry)
Beep, beep, beep
