M
M
HH
8
STEP 7:
STEP 8:
Attach (2) Back Panels
(Part M) using (20) Back
Panel Screws (Part HH).
Tighten with a Phillips
Screwdriver.
LL. Plastic Barrel
Nut x24
R
S
T
FF
FF
LL
LL
1. Attach the Right and Left Drawer Sides (Parts
S and T) to the Drawer Back (Part RR) with (4)
40mm Screws (Part FF) and (4) Plastic Barrel
Nuts (Part LL). Note: grooves in bottom must
align. Tighten with Phillips Screwdriver.
NN
U
V
P
NN
NN
2. Slide drawer bottom
(part u) into the grooves.
Install the Drawer
Support (Part V) using
(1) 25mm Screw (Part
NN). Tighten with the
Phillips Screwdriver.
3. Attach the Drawer Front (Part P).
Using (4) 25mm Screws (Part NN).
Be sure the bottom panel is in the
groove. Tighten with the Phillips
Screwdriver.
HH. 15 mm Back
Panel Screw x20
FF. 40mm Screw x24
NN. 25mm Screw x30
