6
STEP 3:
MM. Plastic Crescent Washer X4
A
E
L
STEP 4:
Repeat Step 3 using the Right Side (Part B).
Refer to Page 4 to install the 65mm Bolt and Plastic
Crescent Washer.
B
E
L
BB, MM
BB. 65mm Bolt x4
MM. Plastic Crescent
Washer X4
BB. 65mm Bolt x4
BB, MM
BB, MM
BB, MM
Insert the Bottom Back Panel (Part E) and the
(2) Middle Front Rails (Part L) into the Divider
Frame. Carefully align all of the dowels (check
to confirm they are still installed) with the holes
in the Left Side (Part A). Attached the Left Side
using (4) 65mm Bolts (Part BB) and (4) Plastic
Crescent Washers (Part C) following the
directions on page 4. Tighten all bolts with the
M5 ball Allen Wrench.
