7
STEP 5:
STEP 6:
K
N
N
GG
GG
Attach the Bottom Front Molding (Part K) to the front of
the case using (8) 30mm Screws, ensure the screws go
into the predrilled holes in the molding. Tighten with a
Phillips screwdriver. Next attach the (2) Bottom Side
Moldings (Part N) to the case using (3) 30mm screws
for each, ensure the screws go into the predrilled holes
in the molding.
D
DD
DD
EE
Attach the Top Panel (Part D) to
the case. Ensure (2) Dowels from
the side are aligned properly
before installing any bolts. Install
(8) 45mm bolts (Part DD) through
the Top Front and Back Rails, then
install (4) 35mm Bolts (Part EE)
through the sides. Tighten all bolts
with the M4 Allen Wrench.
GG. 30mm Screw x14
DD. 45mm Bolt x8
EACH SIDE
EE. 35mm Bolt x4
