6
7
4. Connect a 6 in. circular duct (4.1) (not supplied)
and vent to the outside. Secure it with duct tap
(not included) or clamp (not included) to make the
connection secure and air tight.
Note:
If available ducting is 4 inches in diameter, the
optional duct adapter (C) can be used to reduce the 6
in. duct connector (4.2) on the fan housing (A) to the 4
in. ducting. Use duct tape (not included) or clamp (not
included) to secure the ducting to the adapter to create
an air tight seal.
5. Insert the LED connector (5.1) on the LED light panel
(B) into the fan housing (A).
6. Attach LED light panel (B) by pinching the mounting
springs (6.1) and inserting them into the narrow
rectangular slots (6.2) on both sides of the fan housing
(A).
Using the switch on the back of grille, choose the color
temperature you want for your LED.
You can choose from 2700K warm white, 4000K cool
white, and 5000K daylight white.
NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS
4.1
4.2
A
C
5.1
B
A
6.1
6.2
6.1
B
A
Joist
Joist
CCT
Switch
4
6
5