DELTA BREEZ SIG80-110ELED Package Contents Manual Download Page 15

14

15

WARRANTY

DELTA ELECTRONICS THREE YEAR LIMITED WARRANTY
Delta Electronics Inc. (“Delta Electronics”) warrants to the original consumer purchaser in the USA that the 

Breez ventilation fan products will be free from defects in material or workmanship. This warranty is limited to 

three (3) years from the original date of purchase.
Limitations and Exclusions
1.  During the warranty period, a replacement for any defective product will be supplied free of charge for 

installation by the consumer. The warranty provided herein does not cover charges for labor or other costs 
incurred in the troubleshooting, repair, removal, and installation service.

2.  All returns of defective parts or products must include the product model number, and must be made 

through an authorized Delta Electronics distributor. Authorized returns must be shipped prepaid. Repaired 
or replacement products will be shipped by Delta Electronics F.O.B. shipping point.

3.  Delta Electronics shall not be liable for any indirect, incidental, consequential, punitive, or special damages 

arising out of or in connection with products use or performance, regardless of the form of action whether 
in contract, tort (including negligence), strict product liability or otherwise.

4. 

This warranty does not extend to fluorescent lamp starters and tubes.

5.  The warranty does not cover if user does not comply with manufacturer’s installation manual.
6.  To qualify for warranty service, you must notify Delta Electronics at the address or telephone number 

below.

7.  Delta Electronics shall have no liability to the original owner-user with respect to any defect caused 

by abuse, misuse, neglect, improper transportation or storage, improper testing, improper installation, 
improper operation, improper use, improper maintenance, improper repair, improper alteration, improper 

modification, tampering or accident of products or parts thereof, or unusual deterioration or degradation of 
products or parts thereof due to a physical environment beyond the requirement of products' specifications.

Address: 46101 Fremont Boulevard, Fremont, CA 94538
US Toll Free Number:
1-888-979-9889 – Technical Support
1-877-685-4384 – Customer Sales Support
www.deltabreez.com

Summary of Contents for SIG80-110ELED
















Reviews: