10
11
4.3
4.1
4.2
6.1
B
A
5.1
5.2
A
C
Joist
Joist
5
4
6
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS
4. Remove the fan junction box cover (4.1). Using wire
nuts (not supplied), connect the house wires (4.2) to
the fan wires (4.3) as shown in the wiring diagram on
page 4. 14 AWG is the smallest conductor that can be
used for branch-circuit wiring. Reattach fan junction
box cover (4.1)
5. Connect a 6 in. circular duct (5.1) (not supplied)
and vent to the outside. Secure it with duct tap
(not included) or clamp (not included) to make the
connection secure and air tight.
Note:
If available ducting is 4 inches in diameter, the
optional duct adapter (C) can be used to reduce the 6
in. duct connector (5.2) on the fan housing (A) to the 4
in. ducting. Use duct tape (not included) or clamp (not
included) to secure the ducting to the adapter to create
an air tight seal.
6. Insert the LED connector (6.1) on the LED light panel
(B) into the fan housing (A).