12
13
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS
7. Attach LED light panel (B) by pinching the mounting
springs (7.1) and inserting them into the narrow
rectangular slots (7.2) on both sides of the fan
housing (A).
Using the switch on the back of grille, choose the
color temperature you want for your LED.
You can choose from 2700K warm white, 4000K cool
white, and 5000K daylight white.
WARNING: Disconnect power supply before servicing. See SAFETY INFORMATION before proceeding.
Routine maintenance should be done at least once a year.
• Wipe down LED light panel with a damp cloth.
• Remove excess dirt and dust from the fan housing with a vacuum cleaner.
• Do not use solvents, thinner or harsh chemicals for cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse LED light panel into water.
Single speed control mode: Turn the POWER switch
on to operate at user-adjustable full speed airflow, 80
or 110 CFM.
Factory setting: 110CFM.
7.1
7.2
7.1
B
A
CCT
Switch
CARE AND MAINTENANCE
OPERATION
Full speed air volume
preset control
7
c
0.
4
c
0.
3
BAR CODE
LABEL
11
0
80
11
0
80