EN
24
25
If the motor is not working:
- Check that the wiring corresponds to the diagrams in the “Connection” chapter.
- Check the power supply in the network.
- Check that the motor is not in thermal protection mode; just wait a few minutes
for it to cool down.
- Check whether there is a problem linked to the end of travel settings and
reset them.
The end of travel points are not applied:
- Check the mechanical components of the system
(stabilisation, play, distortion, etc.)
- Check whether there is a fault linked to the end of travel settings and reset them.
14/ Help
It is possible that after the learning process the shutter will move in the opposite
direction to the button you press.
If that is the case, you can reverse the direction by briefly pressing button B on
the front panel of the remote control until the LED flashes green.
Then press the up/down buttons at the same time and hold for 3 seconds.
• Power supply: 230V - 50 Hz +/- 10%
• Class II insulation
• Operating time: 4 minutes
• X3D radio frequency: 868.7 MHz to 869.2 MHz
• Maximum wireless power < 10 mW Category 2 receiver
• Radio range: 100-300 metres in an open field, variable depending on the
associated equipment (the range can vary depending on the installation conditions
and the electromagnetic environment)
• Number of associated transmitters: 16 maximum
• A-weighted sound pressure level: LpA ≤ 70 dB(A).
• Degree of protection: IP x4
• Operating temperature: -20°C -> + 60°C
15/ Technical Characteristics
Summary of Contents for TYMOOV PERFORMANCE DXRP
Page 14: ...www deltadore com...
