14
To reset the default values, proceed as follows:
1. Press "
" (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
DEFAULT VALUES" ap-
pears on the display (B)Press "
";
3. Press "
RESET ALL" to reset all the profiles to the origi-
nal parameters, otherwise select the required profile;
4. "RESET DEFAULT VALUES": press "
" to confirm (or "
" to leave the parameters unaltered);
5. "DEFAULT VALUES RESET": press "
" to confirm and
"
" to go back to the homepage.
5.1 Statistics
This displays statistics relating to the machine. To display the
statistics, proceed as follows:
1. Press "
" (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
STATISTICS" appears on
the display (B);
3. Press "
" to verify all the available statistics by pressing
< or >;
4. Press "
" to go back to the homepage.
9. MAKING COFFEE
9.1 Selecting the coffee aroma
Select the required aroma from the homepage by pressing
"
AROMA" (B6):
(see “9.4 Making coffee
using pre-ground coffee”)
X-LIGHT AROMA
LIGHT AROMA
MEDIUM AROMA
STRONG AROMA
X-STRONG AROMA
Custom (if programmed) /
Standard
9.2 Selecting the coffee quantity
Select the required quantity of coffee in the cup by pressing
"
QUANTITY" (B7):
SMALL SIZE
MEDIUM SIZE
LARGE SIZE
EXTRA-LARGE SIZE
Custom quantity (if pro-
grammed) / Standard
quantity
9.3 Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting the
grinding adjustment dial (A5 - fig. 11).
Please note!
The grinding adjustment dial must only be turned when the cof-
fee mill is in operation.
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coffee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
9.4 Tips for a hotter coffee
For hotter coffee, you should:
• perform a rinse cycle by selecting the "Rinsing" function in the
settings menu (section “8.1 Rinsing”);
• warm the cups with hot water using the hot water function
(see section “12. Delivering hot water”);
• increase the coffee temperature in the settings menu (see
section “4.1 Coffee temperature”).
9.5 Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and make it unusable.
1. Fill the container (A3) (fig. 12) with coffee beans;
2. Place a cup under the coffee spouts (A8);
3. Lower the spouts as near as possible to the cup (fig. 13).
This makes a creamier coffee;
4. Press <(B10) or > (B8) until the required coffee is
displayed;
5. Then select your required coffee from the homepage:
