26
8. "IMMERSE FILTER IN THE
WATER TANK LETTING AIR
BUBBLES ESCAPE" (fig.
63): Insert the filter in the
water tank and immerse it
completely for about ten
seconds, sloping it and
pressing it lightly to ena-
ble the air bubbles to es-
cape. Press "
";
9. "INSERT FILTER INTO ITS HOUSING AND PUSH IT DOWN TO
BOTTOM": Insert the filter in the filter housing (A17) (fig.
48) and press as far as it will go. Press "
";
10. "INSERT WATER TANK": Close the tank with the lid (A15),
then replace the tank in the machine.
11. "PLACE 0.5l CONTAINER UNDER SPOUTS, PRESS OK TO FILL
FILTER" (fig. 8): Place the container under the hot water
spout (C6) and press "
". Delivery begins and stops
automatically.
The filter is now active and you can use the coffee machine.
21.2 Replacing the filter
Replace the filter (C4) when "
REPLACE WATER SOFTENER
FILTER, PRESS OK TO START" appears on the display (B1): to re-
place immediately, press "
" and follow the instructions
from point 4.
To replace the filter later, press "
". The
symbol
appears on the display to remind you that the filter needs
replacing.
To replace, proceed as follows:
1. Extract the tank (A16) and exhausted filter;
2. Remove the new filter from the packaging;
3. Press "
" (B2) to enter the menu;
4. Press <(B10) or > (B8) until " WATER FILTER" appears on
the display;
5. Press "
";
6. " REPLACE FILTER" appears on the display;
7. Press "
";
8. Follow the operations described in the previous section
from point 5.
The filter is now active and you can use the coffee machine.
Please note!
After two months (see date indicator) or when the appliance has
not been used for 3 weeks, you should replace the filter even if
the message has not yet been displayed.
63
21.3 Removing the filter
Replace the filter (C4) when "REPLACE WATER SOFTENER FILTER,
PRESS OK TO START
" appears on the display (B). To replace
the filter immediately, press "
" and follow the instruc-
tions from point 3.
To replace the filter later, press "
". The
sym-
bol appears on the display to remind you that the filter needs
replacing.
To use the machine without the filter, proceed as follows:
1. Extract the tank (A16) and exhausted filter;
2. Press "
" (B2) to enter the menu;
3. Press <(B10) or > (B8) until " WATER FILTER" appears on
the display;
4. Press "
";
5. " REMOVE FILTER" appears on the display;
6. Press "
";
7. "
CONFIRM REMOVE FILTER": press "
" (or
press "
" to go back to the settings menu);
8. "
FILTER REMOVED": the change has been saved.
Press "
" to go back to the homepage.
Please note!
After two months (see date indicator) or when the appliance has
not been used for 3 weeks, you should replace the filter even if
the message has not yet been displayed.
22. TECHNICAL DATA
Voltage:
220-240 V~ 50/60 Hz max. 10 A
Power:
1450 W
Pressure:
1.9 MPa (19 bars)
Water tank capacity:
2 l
Size LxDxH:
260x480x375 mm
Cord length:
1750 mm
Weight:
12.4 kg
Beans container capacity:
400 g
This appliance complies with European regulation no.
1935/2004 on food contact materials.
23. DISPOSING OF THE APPLIANCE
The appliance must not be disposed of with household
waste, but taken to an authorised waste separation
and recycling centre.
