11
en
SLEEP function
This function is useful for the night as it gradually reduces
operation of the appliance.
To set this function correctly:
•
Select the cool or heat mode as described above.
•
Press the
button.
The appliance operates in the previously selected mode.
When you choose the sleep function, the screen will reduce
the brightness.
The SLEEP function maintains the room at optimum
temperature without excessive fluctuations in either
temperature or humidity with silent operation. Fan speed is
always at Low, while room temperature and humidity vary
gradually to ensure the most comfortable.
When in COOL mode, the selected temperature will
increase by 1° C (1° F) per hour in a 2 hour period. This new
temperature will be maintained for the next 6 hours. Then
the appliance turn it off.
When in HEAT mode, the selected temperature will
decrease by 1° C (1 °F) per hour in a 3 hour period. This new
temperature will be maintained for the next 5 hours. Then
the appliance turn it off.
The SLEEP function can be canceled at any time during
operation by pressing the "Sleep", "Mode" or "fan speed"
button.
In FAN or DRY mode, SLEEP function is still available.
Switch the unit of temperature
When the appliance is running, press the
button, then
you can change the unit of temperature.
For example:
Before change, in cool mode, the screen display like fig
1
.
After change, in cool mode, the screen display like fig
2
.
SETTING THE TIMER
•
This timer can be used to delay the appliance start-up or
shutdown, this avoids wasting electricity by optimizing
operating periods.
Programming start up
• Turn on the appliance, choose the mode you want,
for example cool, 24 °C, high fan speed. Turn off the
appliance.
• Press
the button, the screen will display 1-24 hours,
and
symbol flash. (fig
3
)
•
Press several times until the corresponding time is
displayed. Wait about 5 seconds, the timer will be
active, then only the symbol is displayed on screen.
(fig
4
)
•
Press again the
button or the
button, the timer
will be canceled, and the
symbol will disappear
from screen.
Programming shut down
•
When the appliance is running, press the
button,
the screen will display hours, and several symbols are
flash together. (fig
5
)
• Press several times until the corresponding time is
displayed. Wait about 5 seconds, the timer will be
active. then only the
symbol is displayed on screen.
(fig
6
)
•
Press again the
button or the
button, the timer
will be canceled, and the
symbol will disappear
from screen.
1
3
5
6
2
4
7
Setting the timer
