background image

27

IT

ALIANO

ENGLISH

IT

ALIANO

IT

ALIANO

IT

ALIANO

IT

ALIANO

IT

ALIANO

IT

ALIANO

IT

ALIANO

RECOMMENDED OPERATING CONDITIONS

WHEN CONDITIONING

Room temperature

21 ÷ 32°C

TECHNICAL SPECIFICATION

Power supply

see rating plate

Max. absorbed power 
in air conditioning

Refrigerating capacity

Refrigerant

Max. absorbed power 
when heating

Number of fan speeds

2

Max. air flow .

370 m

3

/h

Dimensions:

width

580 mm

height

785 mm

depth 435 

mm

Technical specification

ELECTRICAL CONNECTION (U.K. ONLY)

A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should

be cut off from the mains lead, and on appropriate plug fitted, as below. warning: Very carefully dispose of the cut off
plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-
on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the
event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nea-
rest electrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug.

B) If your appliance is not fitted with a plug, please follow the instructins provided below:

WARNING - THIS APPLIANCE MUST BE EARTHED

IMPORTANT

The wires in the mains lead are coloured in accordance with
the following code:

Green and yellow Earth
Blue

Neutral

Brown

Live

As the colours of the wires in the mains lead may not corre-
spond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The green and yellow wire must be connected to the termi-
nal in the plug marked with the letter E or the earth symbol   

or coloured green or green and yellow.

The blue wire must be connected to the terminal marked with
the letter N or coloured black.
The brown wire must be connected to the terminal marked
with the letter L or coloured red.

GB-5751010700  15-01-2004  16:33  Pagina 27

Summary of Contents for PAC 46













Reviews: