23
PROBLEM
CAUSE
SOLUTION
The appliance does not grind the coffee There is foreign matter that cannot be
ground in the coffee mill
Clean the burrs as described in section “8.3
Cleaning the burr”, making sure you remove
all the beans from the beans container (A1)
before extracting it.
Before putting the burr back, vacuum all resi-
dues from the housing (fig.14)
The coffee beans container is not in the
right position
The container is correctly inserted when the
arrow
▲
is lined up with the symbol and
you hear a “click”.
If you want to change the type of coffee You must remove all the beans present
in the machine
• Empty the beans container (if neces-
sary, operate the coffee mill without
beans or use a vacuum cleaner to re-
move any remaining beans)
• Attach the filter holder and operate the
coffee mill a number of times without
beans to free the grinder. Attach the
filter holder to the outlet of the grinder
(A18), lining it up with "INSERT", then
turning it to the right. Grinding begins
when the filter holder reaches the CLOSE
position and stops automatically. Re-
peat until the filter is empty
• Place the new coffee in the beans
container
• If the amount of coffee ground is not
enough to reach the perfect dose, pro-
ceed setting the appliance as for the
first use
After grinding, the coffee filter is empty The coffee grinder coffee funnel is
clogged
Clean as described in section “8.5 Cleaning the
“Smart tamping station””. If the problem per-
sists, access the guide by opening the hatch
and free it using the brush)
After tamping, there is too much coffee
in the filter
…
→
