DeLonghi La Specialista EC9335M, Manual

Page: 43 / 45

42
PROBLEM CAUSE SOLUTION
The espresso coffee drips from the
edges of the filter holder rather than
the holes The filter holder is inserted incorrectly Attach the filter holder correctly and rotate
firmly as far as it will go
The espresso boiler gasket has lost elas-
ticity or is dirty Have the espresso boiler gasket replaced by
Customer Services
The filter is clogged, or the perforated
filter is missing or dirty Clean as described in section "13.4 Coffee
filter cleaning and maintenance"
The coffee froth is too light (delivered
from the spout too fast) The appliance settings need reviewing See section "16. How to make perfect coffee"
The coffee froth is too dark (delivered
from the spout too slowly) The appliance settings need reviewing See section "16. How to make perfect coffee"
No milk froth is formed when making
cappuccino The ring (A7) is in the "FLAT" (NO
FROTH) position Push the ring into the "FOAM" position
Milk not cold enough Always use semi-skimmed milk at refrigera-
tor temperature.
The cappuccino maker (A8) is dirty Clean the cappuccino maker as described in
section "10. Cleaning the cappuccino maker
after use"
Scale in the water circuit Descale as described in section "14.
Descaling"
At the end of descaling, the appliance
requests a further rinse During the rinse cycle, the water tank
has not been filled to the MAX level Repeat the rinse cycle from point (8) of section
"14. Descaling"
The appliance does not grind the coffee There is foreign matter that cannot be
ground in the coffee mill
Clean the burrs as described in section "13.8
Cleaning the burrs", making sure you remove
all the beans from the beans container (A2)
before extracting it.
Before putting the burr back, vacuum all resi-
dues from the housing (fig. 44).
…
→