DeLonghi La Specialista EC9335M, Manual

Page: 44 / 45

43
PROBLEM CAUSE SOLUTION
If you want to change the type of coffee You must remove all the beans present
in the machine
• Empty the beans container (if neces-
sary, operate the coffee mill without
beans or use a vacuum cleaner to re-
move any remaining beans).
• Attach the filter holder and operate the
coffee mill a number of times without
beans to free the coffee guide. Attach
the filter holder to the outlet of the mill
(A22), lining it up with , then turning
it to the right (fig. 22). Grinding begins
when the filter holder reaches the
position and stops automatically. Re-
peat until the filter is empty.
• Place the new coffee in the beans
container.
• If the amount of coffee ground is not
enough to reach the “perfect quantity”,
proceed as described in section "4.5 Ad-
justing the quantity of ground coffee in
the filter".
After grinding, the coffee filter is empty The coffee mill coffee guide is clogged Clean as described in section "13.10 Cleaning
the "Smart tamping station"". If the problem
persists, access the guide by opening the hatch
and free it using the brush (fig. 50).
After grinding, there is too much coffee
in the filter
After grinding, the ground coffee in
the filter does not reach the “perfect
amount of coffee” The "Smart Tamping Station" needs
cleaning Clean as described in section “13.11 Cleaning
the "tamping station", then grind again.
The quantity of ground coffee needs
adjusting Adjust the quantity of coffee with the dial
(B2), following the instructions in section
"4.5 Adjusting the quantity of ground coffee
in the filter". If the dial is already in the max.
position, proceed as described in section "12.6
Extra grinding adjustment".
Over time the burrs wear down Replace the burrs as described in section
"13.9 Replacing the burrs".