DeLonghi La Specialista EC933 Series, Instructions For Use Manual

Page: 14 / 19

14
11.11 Other cleaning
operations
1. Do not use solvents or
abrasive detergents to
clean the coffee maker.
Use a soft damp cloth only.
2. Clean the filter holder cup.
For thoroughly cleaning, use
De'Longhi cleaner.
12. DESCALING
Descale the appliance when the light
(B9)
comes on.
• Before use, read the instructions and the labelling on the
descaler pack.
• It is important to use De’Longhi descaler only. Using unsuitable
descaler and/or performing descaling incorrectly may result in
faults not covered by the manufacturer's guarantee.
Proceed as follows:
1. (IF PRESENT, REMOVE THE WATER SOFTENER FILTER)
.
Pour the descaler into the tank up to the level
A
marked inside the tank (equal to one 100ml packet), then
add water (litre) up to the level
B .
2. If the appliance is off, press the ON/Standby button
(B1).
3. Make sure the filter holder is not attached and position a
recipient under the spouts
(A5), (A6)
and the boiler outlet
(A21) (fig. 8).
4. Turn the mode selector dial (B8) to the (B8) position.
The light flashes and the "OK" light comes on.
5. Press "OK" (B5) to start descaling.
6. The descale programme starts and the descaler liquid comes
out of the spouts and boiler outlet. The descale programme
removes limescale deposits from inside the appliance by au-
tomatically performing a series of rinses and pauses until the
tank is empty.
7. Delivery stops and the (B15) and lights corre-
sponding to the rinse button (B4) come on.
8. Empty the recipient used to collect the descaler solution
and replace it empty under the spouts.
9. Remove the water tank, empty any residues of descaler
solution, rinse with running water and fill with fresh water
up to the MAX level. Put the tank back in its housing.
10. Press the button. The appliance rinses the internal cir-
cuits and delivers water from all three spouts.
11. When rinsing is complete, delivery stops. All the LEDs flash
briefly and the appliance prepares to be used again.
12. Empty the recipient used to collect the rinse water.
13. Extract and empty the drip tray, then put back in the
appliance.
14. Extract the tank, fill with fresh water, then put back in the
appliance.
15. Turn the mode selector dial to one of the coffee positions.
13. TECHNICAL DATA
Voltage:
220-240V˜50/60Hz
Power:
1450W
Size LxDxH:
375x368x445 mm
Pressure:
19 bar
Water tank capacity:
2 L
Cord length:
1200 mm
Weight:
12 kg
49